DIY Fabric Pumpkins

DSC06736

So by now you’ve probably seen the succulent-topped pumpkins everyone has been making…So, if you’re like me & aren’t a huge fan of traditional bright orange pumpkins or you just love things with a funky, unique vibe, this succy-pumpkin DIY is for you! & it’s honestly SO stinking simple & so CAYUTE!

As I was perusing Joann’s fabric the other day their Autumn seasonal fabrics had me heartstruck. I spotted 4 adorable flannel & fall-themed patterns, & I knew I had to figure out something fun to do with them. Then I looked over & saw a bag of faux mini pumpkins on sale & it hit me. Fabric-covered Succulent-topped pumpkins.


YOU ONLY NEED A FEW SUPPLIES

  • Faux Pumpkins of any size or color!
  • Fabric (quantity needed will depend on the size pumpkin you use. For large pumpkins you’ll need approx. 1/2yd, but for mini pumpkins like I show in this blog I used only 1/2 of a remnant square they had on sale!)
  • Hot Glue & Gun (and/or Craft Glue for glueing the succulents)
  • Moss
  • Succulents
  • Spray Adhesive
  • Scissors

Now, Grab Your Favorite FALL Latte & Let’s Get Started!

DSC06040

STEP ONE: Get your fabric & lay it flat on the table (iron before you begin if needed). Set the pumpkin down toward one of the corners of the fabric to conserve fabric, you’ll have a bit leftover.  NEXT, Do a practice fold with fabric by bringing all corners of the fabric up toward the stem of the pumpkin, and adjust direction of pumpkin as needed to help you eyeball how large of a square you will want to cut.

DSC06052

NOW, Time to measure & CUT! This is the hardest part of the DIY honestly, and that’s not saying much because it’s still ridiculously easy lol I’ve found as a general rule of thumb, to wrap all the way around the pumpkin, you’re going to want your fabric to be about twice the length & height of your pumpkin. If you want to be super precise you can measure the bottom of your pumpkin and multiply it by 2 and maybe add an extra inch for good measure, this should make the fabric large enough & give a little wiggle room in case you make a wrong cut somewhere down the road. AFTER you’ve measured, cut out your square.

After you’ve cut your fabric square, place pumpkin in the center of square, and do another practice run scrunching your fabric up toward the stem, just to ensure it reaches all the way around!

DSC06074NEXT, Put a small dab of hot glue on the top of your pumpkin right next to the stem, and press the fabric into it. (Hack, if your hot glue gun gets ridiculously hot like mine, use a chopstick to press the fabric down into the glue so you don’t burn your fingers, or use heat protective gloves)

Work your way around the pumpkin chunk by chunk, doing this over and over. Bunching the fabric and glueing it to the top. Feel free to scrunch up the fabric as much or little as you like as you go, whatever look you prefer. The more you bunch the fabric together, the more it will actually look like it has those pumpkin creases in the sides.

Pumpkin Leaves Pattern Fall Desktop Wallpaper

As you’re making your way around the pumpkin, feel free to trim the excess fabric at the top, around the stem as much as needed, your square may be a bit bigger than necessary. Also, keep in mind, what the top of the pumpkin looks like doesn’t really matter, since it will get covered up by succulents later.

dsc06131.jpg

Once you’ve made it all the way around the pumpkin with your fabric & glue, and trimmed what needs to be trimmed, it’s time for the FUN PART! Succulent Time!

DSC06140

To prep the top of your pumpkin for the succulents, spray the adhesive around the entire top of pumpkin and stem, and press a thin layer of moss on top. This step is necessary because the moss will hold moisture to hydrate your succies when you water, without causing them to rot.

DSC06157

Once the moss is on, it’s succy time! I like to start by putting my favorite and somewhat largest succulent (or 2 off-centered succulents) in the middle and then building around it. Put a generous amount of hot glue either on the top of the moss where you’ll be placing the succulent, or put the dollop of hot glue on the bottom of the succulent, and press to the moss firmly and hold until completely cooled and hardened. (Note, you can also use craft glue for the glueing of the succies, whichever you’d prefer, I like hot glue because it dries instantly so I can build more quickly) PLEASE NOTE: Glueing the succulents, even with hot glue, will not kill them or damage them. I will talk at the end of the blog about how to dismantle your succies & what to do with them after Fall is over & pumpkin season is no more.

Keep doing this until you’ve covered the top of your pumpkin and feel like it’s exactly how you want it! I loveeeee how ours turned out, and it goes perfectly styled with the lanterns we made last week and our traditional succy-topped pumpkins, (DIY on how to make those to coming very soon).

DSC06277

AND VOILA’! You are now ready to get down with your Festive Fall Bad Self. I didn’t lie, that was ridiculously easy right? If you’re like me, you’ll want to make at least 5 of these cuties, plus they make AMAZING festive gifts, for house-warming or just to say I love you 🙂

QUICK NOTE on Maintaining these cuties! So in order to keep your succulents happy, try to keep your pumpkin somewhere they will get indirect bright light, not direct hot sunlight all day. Or if you plan to put them in a dark corner of a bookshelf or desk make sure they get some time in windowsill sun at least two times a week. Also, for watering, once a week or once every other week (depending on inside or outside & how hot the spot it is in will be) take a spray bottle and try to spritz a tiny bit of water around the roots of the succulents, into the moss. But not TOO much! The moss will soak up the water and keep the succy roots moist throughout the week. & That’s all!

After the fall season ends, you can simply & easily dismantle your pumpkin whenever youd like. GENTLY wiggle & pull the succulents free from the moss, and peel any remaining hot glue off the roots and plant in a good draining soil mix of 50% PUMICE 50% soil, and they will continue to grow, unharmed!

That’s it! Hope you enjoyed this tutorial, and I hope to see your fabric pumpkins on the interwebs soon! ❤

DSC06769

Happy Fall Ya’ll!

Screen Shot 2018-08-18 at 12.36.27 AM

Fall Succulent Lantern DIY

DSC05475

‘Tis the season for pumpkin spice, pumpkin bread, even pumpkin-decked SUCCULENTS! & I’m here for all of it! FALL is my absolute favorite season, which is making me spend far too much money on fall succulent projects this year lol but #noragerts Going into the season I wanted to do something different than succulents pumpkins (even though they’re always cute & def have made more this season already). For inspiration I was casually browsing through Michael’s & spotted these gorgeous vintage lanterns for 60% off + my coupon, & knew immediately that my first priority of the season would be to fill them to the brim with succulents, surround them with pumpkins, succulents, & fairy lights! So I did, and oooof I’m in love. So, let’s get started DIY-ing.


WHAT YOU’LL NEED

  • Lanterns – I got these on sale at Michael’s for $12, but Hobby Lobby also has a large selection right now! You can also find some amazing vintage ones thrifting!
  • Cactus Soil – ( I use Kellogg brand Cactus, Citrus Palm mix, or EB Stone Succy mix)
  • PUMICE – Our General Pumice, obviously 😉 I used our size 1/8″, & pumice is VERY, very important for this project! & I’ll talk about WHY! ….PS. if you’re reading this, I’m so thankful that I want to give you a 10% OFF discount on any pumice order, just use discount code “LANTERN” during checkout!
  • Succulents! (Keep in mind if these lanterns are going to be indoors in low light, pick hardy succulents that thrive without lots of light! Here’s a list of those! 
  • Chopsticks & Tweezers (they make planting these tiny spaces a billion times easier)
  • Optional recommendation: Here’s an amazing succy utility tool belt with literally everything you need tool-wise for this project & pretty much any other project! It has the tiny spade I use for everything, spray bottle, succy-safe brush, tweezers, literally everything. (I don’t get paid or anything for recommending it, it just made my life so much easier so need to share!)

DSC04999As you can see, you really don’t need a ton of supplies you probably don’t already have, so let’s get to it!

FIRST THINGS FIRST,

Mix up some gooooood soil, I’m treating these beauties basically as terrariums, because they are extremely similar. (You can also read my terrarium DIY blog here). As you can see in the pictures, these lanterns don’t have holes in the bottom, SO if you know you’re not going to use these for anything else, I would recommend poking 5-6 small holes in the bottom of each lantern for drainage. OR instead, as I chose to do, add a THICK layer of PUMICE to the bottom before anything else! This will catch & absorb any excess water, so moisture doesn’t sit around the roots of your succies & cause them to rot!

cnava

After you’ve added your foundation of PUMICE, next mix your soil! The soil you use is the MOST IMPORTANT factor when it comes to terrariums & planting projects like this! I cannot stress that enough if you want these beauties to actually live & thrive! So for my soil I mixed about 60% PUMICE, with 40% cactus soil! Pumice is the Swiss army knife of succulent planting, I swear. It has a multitude of benefits when planting in general (read all of them here), but especially with terrariums. The main benefits are:

aaCream Asymmetrical Layouts Simple Presentation-2

 

NEXT STEP!

     After you’ve mixed your pumice/soil mixture, you’re ready to rock & roll! Add a HEAPING layer of soil, my base was about 2.5″ tall you’re going to want to make sure there’s a tall enough layer of soil that your succulents are on display tall & proud (especially if you’re going to want to have the doors of the lanterns closed!) Also, you’ll notice these lanterns don’t have any soil-catching barriers, like a lip to keep the soil from falling out the front, BUT, I knew exactly where I wanted the lanterns to sit permanently (at my front door) and I won’t be moving them so that’s not a big deal to me. The soil stays put by itself pretty well as long as you’re not swinging it around or moving it consistently. But, if you’d like you can make a little “gate” out of popsicle sticks or little piece of wood, preferably painted to match your lantern colors. 

     To start planting the succulents, I suggest start from the back, put your tallest succulents back here, with eye-catching patterns or textures, then work your way forward to have the smallest succulents in front! Using the chopsticks to push and anchor the roots down in deep is a life-changing hack that makes planting in this tiny space a million times easier! Don’t be afraid to move stuff around as much as you want, also be prepared for soil to continually avalanche out the front as you scoot everything around & find the perfect places for your succulents LOL, just keep replacing the soil as you go!

Screen Shot 2019-10-03 at 11.19.03 AMAs you’re planting, make sure to clean ALL the old soil off the roots of each sucuclent completely! This will make sure they’re totally bug-free, and loosen the roots up for the healthiest succulents possible! Then, go to town, mix up your colors of succulents, sizes, textures, maybe have a few spilling out the front like I did on the smaller lantern with my sedum donkey tails! Just have fun with it & go crazy! 

DSC05411DSC05286

LET’S TALK MAINTENANCE!

     Now that you have your new beautifully funky Fall planter, how do you take care of it?! Also super super easy. With terrariums & these types of fun planters that don’t have drainage holes, I NEVER pour-water them, not even a tiny bit! I typically do 1 of 2 things:

     Once a week or every other week depending on where it’s positioned (inside/outside, has it been abnormally hot & dry) I’ll use a water-dropper (you can just use a dropper recycled from an empty medicine) fill it all the way up with water & drip the water AROUND the succulents into the soil sparingly. They don’t need very much water, I’ll use maybe 1 or 2 full droppers per lantern. they actually do better being under-watered than over-watered. Don’t drop the water on TOP of the succulents or in the rosettes of the succulents, this can cause/attract mealie bugs.

     OR, you can use a spray bottle and spray around the succulents as best you can, making sure to direct the water at the soil & roots, not on the succulents. Again, this should only be done about once a week, or every other week if you touch the soil & it still feels damp.

     IMPORTANT SIDE NOTE:  Make sure these beauties are in a place where they at least get a LITTLE bit of light throughout the day, otherwise you’ll need to move your lantern to a window a few times a week so the plants get the sunshine they need to grow & live!

DSC05515DSC05495DSC05194

     THAT’S ALL Friends! Now go build your own & find the perfect place for them! I highly suggest adding twinkle lights, twinkle lights literally make everything 234760 zillion times prettier & more whimsical! Keep your eyes peeled for our next blog, next week for a new take on succulent pumpkins that I’m losing my mind over!

     Ok, now I’m off to go bake & eat my body-weight in chocolate-chip pumpkin bread, HAPPY FALL! 

Screen Shot 2018-08-18 at 12.36.27 AM

Terrarium DIY

Let’s talk TERRARIUMS, amigos!

DSC00641-2

     So if you haven’t noticed, terrariums have become all the rage lately in decorating, and I am all about it! (Confession, I may or may not currently have 3 terrariums in my living room alone LOL) Terrariums are stinkin’ adorable, & when done right, are such a ridiculously low-maintenance way to add a funky, unique, fun pop to any room. So let’s chat about the RIGHT way to plant them!

     First things first, THEE key & probably the single most important part of building your terrarium, is your soil. I always say your succulents are only as healthy as the soil you plant them in, and this is even more true & critical when building a terrarium. With succulents you ALWAYS want to make sure you have the best-draining soil possible=a mix that allows ample drainage, plenty of oxygen flow throughout the soil, & allows the carbon dioxide to cycle from the bottom, up, & out of your terrarium or planter. SOOOO what’s the secret sauce to creating this type of soil? the BEST, most natural way of doing that is by….

DSC00472

1st KEY: Using a good quality soil (ie. one that is low in peat moss & low in coco coir because these can easily cause root rot, mold, & attract bugs) I typically use either Kellogg’s Palm, Cactus, Citrus soil, or EB Stone’s Cactus Mix (both of which have a small % of our pumice in them already!

2nd KEY: Boost the health of your soil by using lots of PUMICE!  Pumice has a multitude of benefits when planting in general (read all of them here), but especially with terrariums. One of the main benefits of pumice is it’s sponge-like structure, which allows for excess water absorption; terrariums have no drainage holes in them so if you over-water the extra water will puddle at the bottom and cause your plants to rot. So using a high % of pumice in your soil (I typically use at least 60% pumice mixed with 40% soil) will ensure any extra water will be soaked up within the pumice stones, and released only when the soil begins to dry out! On top of that super helpful quality, PUMICE also has dozens of trace minerals in it that help feed your plants nutrients, it adds significant aeration, allows that carbon dioxide to leave the root system, deters bugs, & never rots/never needs to be replaced.

DSC00482

First, add a layer of PUMICE at the bottom as a base to catch excess water, then add your mix of 60% pumice, 40% soil.

So, now that you have the 2 major keys to building your perfectly crafted & low-maintenance terrarium, let’s get to actually building!

   STEP 1:    I like to prime my terrarium with a base layer of PUMICE. I put about a 1-2″ layer of pure pumice (I used our 1/8″ size in this project). This again, catches any excess water & keeps your succulents roots nice & dry. Some people also like to add a layer of activated charcoal on top of the pumice, especially for enclosed terrariums, or shapes that do not get a lot of oxygen flowing through them. Using a thin layer of activated charcoal can stimulate oxygen, keep the water fresh, & fight off bacterial growth.

   STEP 2:   After you’ve laid your foundation, next step is to add your 60:40 – pumice:soil mixture. I suggest adding at least a 2″ layer of soil, depending on the height/size of your terrarium you can add more or less; for this medium sized terrarium I used an average of 2.5″ deep in the middle, so the succulents would be flush with the lip of the terrarium. Additionally, I actually increased the depth of the soil towards the back of the terrarium to about 3″, to better elevate and show off the far succulents, making the soil deeper made those plants visible from every angle. Soil depth is really personal preference, it comes down to what look you like, you can get away with a lower depth of soil, I just prefer more depth aesthetically, & so the roots have plenty of room to spread out over time. 

  STEP 3:   Grab your succulents and start removing the soil from the root ball!

DSC00500

Remove ALL soil from the roots.

     For indoor terrariums I typically suggest using succulents that do well indoors. For this terrarium I chose a mix of hardy succulents that I had around: a Graptoveria Debbie for my “focal succy”, a zebra haworthia (to add dimension), panda plants, Aeonium Castello-paivae, ghosties, and some freshly propagated teeny graptoverias & echeverias. Some other great options for indoor terrariums would be sedums, string of hearts/bananas/pearls, aloes, hens & chicks, jade, lithops, crassula, and most types of cacti! Echeverias are a possible option & are so delicate and beautiful, however most types tend to stretch toward the light if they aren’t directly near a window or source of indirect bright light. Just to keep in mind!

Screen Shot 2019-07-26 at 12.59.36 AM

     When planting the succulents I find it easiest to start with your largest succulent, or whichever succulent will be your focal point that the eye is drawn to, and then build around that. When planting in such a small space, I’ve found having a tiny spade and chopsticks is a serious game-changer! Use the tiny spade to dig a hole for each succulent, and use the chopstick to press the roots down into the soil as far as possible. I bought THIS kit on amazon for $8, and I swear, it’s changed my life; it has everything you could possibly need, from tiny spade & rake, tweezers, spray bottle, squeeze-waterer, farina-safe dust brush etc. It’s an amazing steal not just for terrariums but planting in general! (ps. I’m not getting paid to recommend it, I just love it so much & think it kicks buttcheeks!)

DSC00597-3

     Once you have all your succulents arranged beautifully & squeezed into their cute new terrarium home, (I literally mean squeezed, as you can see I squished alllll these succulents in here because I personally love the look of a rainbow-variety of colors, & overflowing planters with a lot going on. Some people however prefer to leave space and only use a few succulents, so they have room to grow. (NOTE: with any planter, when you plant succulents close together it will slow their growth, they accommodate to the space they are in; so in this case because I have the plants crowded in the terrarium so closely, they will grow much slower, staying the size they are for at least a few months!  I will eventually have to swap them out once they overgrow, but that will be at least 4-5 months from now.

DSC00538

LAST STEP: Time for the finishing touches, using your chopstick & mini spade adjust everything to sit exactly the way you want, and add a final topping of Pumice (I used this blue barrel that came in my handy-dandy amazon kit to pour around the succulents). I dress the top of the terrarium with pumice to again, catch excess water, and because I just love the look it gives it. It has a cool layered-look from the sides & back, and to me has a more finished look than just leaving the soil exposed. 

DSC01356

…& that’s all folks. It’s seriously THAT easy!

DSC01334

Now, Let’s talk follow-up: WATERING & Maintaining

     This is the final major key to keeping your terrarium healthy & last as long as possible! This was also the most asked questioned I got on instagram & on my Christmas terrarium project. Like we discussed earlier, because there is no drainage hole in the bottom of terrariums watering makes or breaks your succulents in their new home. Using the base of pumice, & pumice in your soil mix helps immeasurably, but over-watering & mistakes can still happen! 

WHEN TO WATER: My biggest piece of advice for watering your terrarium, less is best, & err on the side of under-watering rather than over-watering. You only want to water your terrarium when the soil is bone-dry. The easiest way to test the soil dryness is by using our handy chopstick, once again. Stick the chopstick as deep as it will go in between your succulents, and pull it out; when you pull the chopstick out, feel it, if you feel any moisture at all on the stick wait to water, but if the stick is clean and dry then you’re ready to water! So with this exact terrarium, I have been watering once every 3 weeks, and it has been extremely happy with that (preface: I live at the beach, so it’s an extremely humid environment, year-round).  

HOW TO WATER: I’ve found the best and safest way to water terrariums is by using a dropper for small terrariums, & using the squeeze-bottle waterer that comes in the Amazon pack for medium-large terrariums. Using this squeeze bottle allows you to water in between the succulents, rather than on top of the succulents. Standing water in the rosette or on top of your succulents can attract aphids and leave unattractive water-spots on your succulents. ALSO SO SO IMPORTANT, when you’re watering, do so EXTREMELY sparingly, do not flood the terrarium, you only need just enough water to simply hydrate the roots of the succulents in the terrarium! So, for example this bad boy we made, I water with barely 1/3″ cup of water total, using the squeeze bottle to water in between the succulents so it goes straight down into the soil (which again, I only do once every 3 weeks when I feel the soil is dry as the Sahara Desert). You DO NOT want to overwater, as stated earlier, it is sooo much better to underwater than overwater, succulents can actually still thrive with neglect, but once they get oversaturated and rot, you’ve lost the battle, & there’s no going back. 

DSC01352

     Now all that’s left is to find the perfect spot for your new work of plant art! I typically suggest putting your terrarium in a place that gets consistent bright & indirect light! Most succulents typically do not do well in low-light areas, or dark corners of cabinets & parts of the house that don’t get natural light. You will be able to tell if your succulents need more light if they start stretching out and getting tall & the leaves begin to stretch out. If this happens, I suggest either moving your terrarium to a brighter area permanently, OR if you really like that spot, just make sure to frequently move it to a sunny spot, several times a week. Unintentional bonus: this will help you get more exercise ;P

DSC01347

    So friends, that’s pretty much it! It’s a lot easier than people think to create & up-keep these beauties, if you do it the right way from the beginning. When using high-quality soil, pumice, planting the roots well, watering accurately, & making sure they get enough light, your terrarium can thrive as long as you’d like! I got a lot of questions about whether it is realistic to keep terrariums for long periods of time without them dying or overgrowing it & having to replant them, and the answer is yes it is absolutely realistic, and even better, they can be literally the most low-maintenance, easy, adorable addition to your home.

Hope that was helpful! Now go get to planting your own terrarium!

DSC01319

Screen Shot 2018-08-18 at 12.36.27 AM

HUGEEEEE thank you to my amazing intern @iwasakiphotos for helping me create this beauty & taking these ridiculously gorgeous photos!